Introduction to the use process of stainless steel clamps. Clamps are widely used in industry, mainly used to connect tools such as gas and liquid. So what is the application process of stainless steel clamps?
1. First, use a pipe cutter to cut the steel pipe to the required length, and use a level to check the cut section to ensure that the cut section is perpendicular to the central axis of the steel pipe. If there are burrs on the cut, we need to use a grinder to smooth it out. 2. Stainless steel clamps Put the steel pipe to be slotted on the groove rolling machine and the groove rolling machine tail frame, use a level to level the steel pipe so that the steel pipe is in a horizontal position, and the end of the steel pipe is close to the groove rolling machine after processing. The axis is perpendicular to the surface of the drum. 3. When the machine is stopped, the depth and width of the groove need to be measured with a caliper. After confirming that it meets the standards, remove the jack and take out the steel pipe. In fact, in the process of using stainless steel clamps, we must do a good job of the problems mentioned in the precautions, and also pay attention to the later maintenance to extend its service life.
The specifications of stainless steel clamps are as follows:
| size | A | B | width | KG |
| ø12.7 | k25.4 | 20 | 10.58 | 0.15 |
| ø19 | k34 | 27 | 10.38 | 0.15 |
| ø38 | k50.5 | 42 | 10.58 | 0.15 |
| ø51 | k64 | 52 | 10.38 | 0.21 |
| ø63 | k77.5 | 68 | 12.13 | 0.29 |
| ø76 | k91 | 80 | 12.39 | 0.34 |
| ø89 | k106 | 94 | 12.58 | 0.38 |
| ø102 | k119 | 106 | 12.67 | 0.43 |
| ø133 | k145 | 129 | 13.47 | 0.66 |
| ø159 | k183 | 168 | 15.16 | 0.74 |
Stainless steel clamp structure diagram
